Front Fender Emblem/Nameplate Replacement. Chevrolet Chevy Suburban

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2008 🢒 Chevy Suburban - 4WD 🢒 Body Hardware and Trim 🢒 Exterior Trim 🢒 Front Fender Emblem/Nameplate Replacement

Front Fender Emblem/Nameplate Replacement Chevrolet Tahoe Hybrid 2 Mode

Callout	Component Name
1	Front Fender Emblem Nameplate Procedure Use a J 25070 or equivalent to remove the old emblem/nameplate. When removing protective liners from adhesive backed emblem/nameplates, be careful not to touch the tape with hands and do not allow the tape to come in contact with dirt or any foreign matter prior to adhesion. Clean all the adhesive residue from the fender using a 50/50 solution by volume of isopropyl alcohol and clean drinkable water. Wipe the surface dry with a clean lint-free towel prior to installing new emblem/nameplate. Apply palm pressure to the emblem/nameplate to ensure full adhesion is made to the fender. Special Tools J 25070 Heat Gun 500-700°F

Callout

Component Name

Front Fender Emblem Nameplate

Use a J 25070 or equivalent to remove the old emblem/nameplate.
When removing protective liners from adhesive backed emblem/nameplates, be careful not to touch the tape with hands and do not allow the tape to come in contact with dirt or any foreign matter prior to adhesion.
Clean all the adhesive residue from the fender using a 50/50 solution by volume of isopropyl alcohol and clean drinkable water.
Wipe the surface dry with a clean lint-free towel prior to installing new emblem/nameplate.
Apply palm pressure to the emblem/nameplate to ensure full adhesion is made to the fender.

J 25070 Heat Gun 500-700°F