Draining Procedure
- Remove the left front wheel. Refer to 
Tire and Wheel Removal and Installation
 .
 
- Raise and suitably support the vehicle. Refer to 
Lifting and Jacking the Vehicle
 .
 
- Clean away all dirt and debris from the transmission fluid drain plug area.
 
- Remove the drain plug.
 
- Allow the system to drain.
 
Notice: Refer to Fastener Notice in the Preface section.
- Install the transmission fluid drain plug, using pipe sealant on the plug threads.
 
Tighten
Tighten the transmission fluid drain plug to 38 N·m (28 lb ft).
Filling Procedure
- Clean away all dirt and debris from the transmission fluid fill plug area.
 
- Remove the transmission fluid level check plug.
 
- Fill the transmission with the proper fluid until even with the bottom of the fill plug hole. Refer to 
Lubrication Specifications
 for fluid recommendation.
 
- Install the level check plug.
 
Tighten
Tighten the level check plug to 38 N·m (28 lb ft).
- Install the left front wheel. Refer to 
Tire and Wheel Removal and Installation
 .