Step  | Action  | Yes  | No  | ||||||
|---|---|---|---|---|---|---|---|---|---|
Schematic Reference: Fog Lights Schematics Connector End View Reference: Master Electrical Component List  | |||||||||
1  | Did you perform the Diagnostic System Check - Vehicle?  | Go to Step 2  | |||||||
2  | 
 Are the fog lamps OFF?  | Go to Testing for Intermittent Conditions and Poor Connections  | Go to Step 3  | ||||||
3  | Using a scan tool, command the fog lamps OFF. Are the fog lamps illuminated?  | Go to Step 5  | Go to Step 4  | ||||||
4  | 
 Are the fog lamps illuminated?  | Go to Step 6  | Go to Step 9  | ||||||
5  | Test the fog lamp voltage supply circuit for a short to voltage. Refer to Circuit Testing and Wiring Repairs . Did you find and correct the condition?  | Go to Step 13  | Go to Step 7  | ||||||
6  | Test the front fog lamp switch signal circuit for the following: 
 
 
 Refer to Circuit Testing and Wiring Repairs . Did you find and correct the condition?  | Go to Step 13  | Go to Step 8  | ||||||
7  | Inspect for poor connections at the harness connector of the underhood fuse block. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs . Did you find and correct the condition?  | Go to Step 13  | Go to Step 10  | ||||||
8  | Inspect for poor connections at the harness connector of the body control module (BCM). Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs . Did you find and correct the condition?  | Go to Step 13  | Go to Step 11  | ||||||
9  | Inspect for poor connections at the harness connector of the fog lamp switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs . Did you find and correct the condition?  | Go to Step 13  | Go to Step 12  | ||||||
10  | Replace the underhood fuse block. Refer to Underhood Electrical Center or Junction Block Bracket Replacement . Did you complete the replacement?  | Go to Step 13  | --  | ||||||
11  | Replace the BCM. Refer to Control Module References for replacement, setup, and programming. Did you complete the replacement?  | Go to Step 13  | --  | ||||||
12  | Replace the fog lamp switch. Refer to Fog Lamp Switch Replacement . Did you complete the replacement?  | Go to Step 13  | --  | ||||||
13  | Operate the system in order to verify the repair. Did you correct the condition?  | System OK  | Go to Step 2  | ||||||