Removal Procedure
- Remove the engine mount. Refer to
Engine Mount Replacement
.
- Remove the intermediate bracket to engine bolts.
- Remove the intermediate bracket from the engine.
Installation Procedure
- Install the intermediate bracket to the engine.
- Hand tighten the engine mount intermediate bracket bolts in the following locations:
⢠| The long bolts in the forward and front lower holes |
⢠| The short bolt in the rear upper hole |
Notice: Refer to Fastener Notice in the Preface section.
- Tighten the intermediate bracket bolts.
Tighten
Tighten the bolts to 100 NĀ·m (74 lb ft).
- Install the engine mount. Refer to
Engine Mount Replacement
.