GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Cobalt 🢒 Body Hardware and Trim 🢒 Exterior Trim 🢒 Decal or Stripe Replacement

Decal or Stripe Replacement Pontiac Front Fender


Object Number: 2017370 Size: SF

Callout

Component Name

Preliminary Procedures

  1. Using a J 25070 or equivalent, in a circular motion, remove the old decal from the body panel.
  2. Remove all adhesives as follows:
    3. • For metal body panels use a 3M Scotch Brite® molding adhesive remover disc, 3M P/N 07502 or equivalent.
    • For plastic panels use a lint-free cloth with Varnish Makers and Painters (VMP) Naptha or a 50/50 mixture, by volume of isopropyl alcohol and clean drinkable water to remove left over adhesive.
  3. For the final preparation prior to application of the new decal, refer to Graphics/Decals/Emblems .

Special Tools

J 25070 Heat Gun 500-750°F

1

Windshield NA Decal

Decal or Stripe Replacement Pontiac Front Side Door


Object Number: 2017374 Size: SF

Callout

Component Name

Preliminary Procedures

  1. Using a J 25070 or equivalent, in a circular motion, remove the old decal from the body panel.
  2. Remove all adhesives as follows:
    3. • For metal body panels use a 3M Scotch Brite® molding adhesive remover disc, 3M P/N 07502 or equivalent.
    • For plastic panels use a lint-free cloth with Varnish Makers and Painters (VMP) Naptha or a 50/50 mixture, by volume of isopropyl alcohol and clean drinkable water to remove left over adhesive.
  3. For the final preparation prior to application of the new decal, refer to Graphics/Decals/Emblems .

Special Tools

J 25070 Heat Gun 500-750°F

1

Front Side Door Upper Decal

Decal or Stripe Replacement Pontiac Rear Body Side Quarter


Object Number: 2017376 Size: SF

Callout

Component Name

Preliminary Procedures

  1. Using a J 25070 or equivalent, in a circular motion, remove the old decal from the body panel.
  2. Remove all adhesives as follows:
    3. • For metal body panels use a 3M Scotch Brite® molding adhesive remover disc, 3M P/N 07502 or equivalent.
    • For plastic panels use a lint-free cloth with Varnish Makers and Painters (VMP) Naptha or a 50/50 mixture, by volume of isopropyl alcohol and clean drinkable water to remove left over adhesive.
  3. For the final preparation prior to application of the new decal, refer to Graphics/Decals/Emblems .

Special Tools

J 25070 Heat Gun 500-750°F

1

Body Decal Package

Decal or Stripe Replacement Chevrolet Hood Panel


Object Number: 2022799 Size: SF

Callout

Component Name

Preliminary Procedures

  1. Using a J 25070 or equivalent, in a circular motion, remove the old decal from the hood panel.
  2. Remove all adhesives as follows:
    3. • For metal body panels use a 3M Scotch Brite® molding adhesive remover disc, 3M P/N 07502 or equivalent.
    • For plastic panels use a lint-free cloth with Varnish Makers and Painters (VMP) Naptha or a 50/50 mixture, by volume of isopropyl alcohol and clean drinkable water to remove left over adhesive.
  3. For the final preparation prior to application of the new decal, refer to Graphics/Decals/Emblems .

Special Tools

J 25070 Heat Gun 500-750°F

1

Hood Decal

Decal or Stripe Replacement Chevrolet Roof Panel


Object Number: 2017361 Size: SF

Callout

Component Name

Preliminary Procedures

  1. Using a J 25070 or equivalent, in a circular motion, remove the old decal from the roof panel.
  2. Remove all adhesives as follows:
    3. • For metal body panels use a 3M Scotch Brite® molding adhesive remover disc, 3M P/N 07502 or equivalent.
    • For plastic panels use a lint-free cloth with Varnish Makers and Painters (VMP) Naptha or a 50/50 mixture, by volume of isopropyl alcohol and clean drinkable water to remove left over adhesive.
  3. For the final preparation prior to application of the new decal, refer to Graphics/Decals/Emblems .

Special Tools

J 25070 Heat Gun 500-750°F

1

Roof Panel Decal

Decal or Stripe Replacement Chevrolet Coupe Rear Compartment Lid


Object Number: 2017353 Size: SF

Callout

Component Name

Preliminary Procedures

  1. Using a J 25070 or equivalent, in a circular motion, remove the old decal from the rear compartment lid panel.
  2. Remove all adhesives as follows:
    3. • For metal body panels use a 3M Scotch Brite® molding adhesive remover disc, 3M P/N 07502 or equivalent.
    • For plastic panels use a lint-free cloth with Varnish Makers and Painters (VMP) Naptha or a 50/50 mixture, by volume of isopropyl alcohol and clean drinkable water to remove left over adhesive.
  3. For the final preparation prior to application of the new decal, refer to Graphics/Decals/Emblems .

Special Tools

J 25070 Heat Gun 500-750°F

1

End Gate Upper Stripe

2

End Gate Lower Stripe

Decal or Stripe Replacement Chevrolet Rear End Spoiler


Object Number: 2017352 Size: SF

Callout

Component Name

Preliminary Procedures

  1. Using a J 25070 or equivalent, in a circular motion, remove the old decal from the rear compartment lid spoiler.
  2. Remove all adhesives as follows:
    3. • For metal body panels use a 3M Scotch Brite® molding adhesive remover disc, 3M P/N 07502 or equivalent.
    • For plastic panels use a lint-free cloth with Varnish Makers and Painters (VMP) Naptha or a 50/50 mixture, by volume of isopropyl alcohol and clean drinkable water to remove left over adhesive.
  3. For the final preparation prior to application of the new decal, refer to Graphics/Decals/Emblems .

Special Tools

J 25070 Heat Gun 500-750°F

1

Rear End Spoiler Decal

Decal or Stripe Replacement Chevrolet Sedan Rear Compartment Lid


Object Number: 2017354 Size: SF

Callout

Component Name

Preliminary Procedures

  1. Remove the rear spoiler assembly. Refer to Rear Spoiler Replacement .
  2. Using a J 25070 or equivalent, in a circular motion, remove the old decal from the rear compartment lid.
  3. Remove all adhesives as follows:
    4. • For metal body panels use a 3M Scotch Brite® molding adhesive remover disc, 3M P/N 07502 or equivalent.
    • For plastic panels use a lint-free cloth with Varnish Makers and Painters (VMP) Naptha or a 50/50 mixture, by volume of isopropyl alcohol and clean drinkable water to remove left over adhesive.
  4. For the final preparation prior to application of the new decal, refer to Graphics/Decals/Emblems .

Special Tools

J 25070 Heat Gun 500-750°F

1

End Gate Upper Stripe