Stop Lamps Inoperative - Center High Mounted Stop Lamp Operates US and Canada
Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Has the Lighting Systems Diagnostic System Check been performed? | -- | ||
2 |
Does the test light illuminate? | -- | ||
3 | Repair the open or high resistance in circuit 17. Is the repair complete? | -- | -- | |
4 |
Do the brake lamps illuminate? | -- | ||
5 | Test and repair the hazard warning switch jumper harness circuits 17 and 27 for an open or high resistance, if OK replace the hazard warning switch. Refer to Hazard Warning Switch Replacement . Is the repair complete? | -- | -- | |
6 |
Does the test light illuminate? | -- | ||
7 | Repair the open or high resistance in circuit 27. Is the repair complete? | -- | -- | |
8 |
Do the right side brake lamps illuminate? | -- | Go to | |
9 |
Do the left side brake lamps illuminate? | -- | Go to | |
10 | Replace the multifunction turn signal lever. Refer to Multifunction Turn Signal Lever Replacement - On Vehicle . Is the repair complete? | -- | -- | |
11 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK |
