GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2001 🢒 Corvette 🢒 Brakes 🢒 Antilock Brake System 🢒 Power Steering Pressure Pipe/Hose Replacement

Removal Procedure

    Object Number: 65356 Size: SH
  1. Remove the power steering pump pulley. Refer to Power Steering Pump Pulley Replacement.
  2. Remove the power steering pressure hose (2) from the power steering pump (1).
  3. Remove the power steering pressure hose (2) from the power steering gear.
  4. Remove the power steering pressure hose (2) from the vehicle.

Installation Procedure

    Object Number: 65356 Size: SH
  1. Install the power steering pressure hose (2) to the vehicle.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the power steering pressure hose (2) to the power steering gear.

    3. Tighten
    Tighten the fitting to 27 N·m (20 lb ft).

  3. Install the power steering pressure hose (2) to the power steering pump (1).

    4. Tighten
    Tighten the fitting to 27 N·m (20 lb ft).

  4. Install the power steering pump pulley. Refer to Power Steering Pump Pulley Replacement.
  5. Bleed the power steering system. Refer to Power Steering System Bleeding.