| • | Put a socket on the clamp bolt and use the socket to move the window. |
| 1. | Adjust the window forward or reward first. |
| 2. | Adjust the front height second. |
| 3. | Adjust the rear height last. |
| • | Sit in the vehicle with the door closed and with the aid of an assistant standing outside of the vehicle, position the window in the door opening. |
| 1. | Adjust the window forward or reward first. |
| 2. | Adjust the front height second. |
| 3. | Adjust the rear height last. |
| • | The gap to the reveal molding (1) should be 5-8 mm (0.2-0.3 in). |
| • | The gap to the retainer (3) should be 5-8 mm (0.2-0.3 in). |
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the window regulator window clamp bolts to 10 N·m (89 lb in).