Fastener Tightening Specifications: Refer to Fastener Tightening Specifications.

1

Front Door Emblem (AWD)

1. When removing protective liners from adhesive backed nameplates, be careful not to touch the tape with hands and do not allow the tape to come in contact with dirt or any foreign matter prior to adhesion.
2. Use a J 25070 or equivalent to remove the old nameplate. Clean all the adhesive residue from the fender, wipe the surface dry with a clean lint-free towel prior to installing new nameplate.
3. Ensure full adhesion is made once the emblem has been installed.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications.

1

Front Door Nameplate (GM)

1. When removing protective liners from adhesive backed nameplates, be careful not to touch the tape with hands and do not allow the tape to come in contact with dirt or any foreign matter prior to adhesion.
2. Use a J 25070 or equivalent to remove the old nameplate. Clean all the adhesive residue from the fender, wipe the surface dry with a clean lint-free towel prior to installing new nameplate.
3. Ensure full adhesion is made once the nameplate has been installed.