For 1990-2009 cars only
Removal Procedure
- Remove the fuel tank. Refer to Fuel Tank Replacement.
- Disconnect the fuel pump module harness electrical connector from the fuel tank pressure sensor.
- Position 2 flat-bladed screwdrivers, one on each side of the sensor, near the vacuum port.
- Carefully use the screwdrivers to lift and release the sensor from the fuel pump module.
Installation Procedure
- Install the fuel tank pressure sensor to the fuel pump module assembly. Ensure that the sensor grommet is fully seated to the pump module.
- Connect the pump module electrical connector to the fuel tank pressure sensor.
- Install the fuel tank. Refer to Fuel Tank Replacement.
