Step
| Action
| Value(s)
| Yes
| No
|
1
| Has the Remote Keyless Entry System Check been performed?
| --
| Go to
Step 2
| Go to
Remote Keyless Entry System Check
|
2
|
- Disconnect the power door lock control module.
- Connect a digital multimeter (DMM) between the lower door lock
control module connector F for the CKT 158 (WHT/BLK) wire and
ground.
- Open the side door.
Is continuity present?
| --
| Go to
Step 3
| Go to
Step 4
|
3
| Replace the power door lock control module.
Is the repair complete?
| --
| Go to
Remote Keyless Entry System Check
| --
|
4
|
- Disconnect the side door jamb switch.
- Connect a DMM between the side door jamb switch connector cavity B
for the CKT 150 (BLK) wire and ground.
Is continuity present?
| --
| Go to
Step 6
| Go to
Step 5
|
5
| Locate and repair the open in the CKT 150 (BLK) wire between
the side door jamb switch and ground.
Is the repair complete?
| --
| Go to
Remote Keyless Entry System Check
| --
|
6
|
- Connect a fused jumper wire between B+ and the power door lock
control module connector cavity F for the CKT 158 (WHT/BLK)
wire.
- Connect an unpowered test lamp between the side door jamb switch
connector cavity A for the CKT 158 (WHT/BLK) wire and ground.
Does the test lamp light?
| --
| Go to
Step 7
| Go to
Step 8
|
7
| Replace the side door jamb switch.
Is the repair complete?
| --
| Go to
Remote Keyless Entry System Check
| --
|
8
| Locate and repair the open in the CKT 158 (WHT/BLK)
wire between the power door lock control module and the side door jamb switch.
Is the repair complete?
| --
| Go to
Remote Keyless Entry System Check
| --
|
