Removal Procedure
- Raise the vehicle. Refer to 
Lifting and Jacking the Vehicle 
  in General Information.
 
- Disconnect the electrical connector from the EVAP vent valve .
 
- Disconnect the canister vent hose.
 
- Bend back the tang on the bracket.
 
- Slide the EVAP vent valve off the bracket.
 
Installation Procedure
- Slide the EVAP vent valve onto the bracket.
 
- Connect the canister vent hose.
 
- Connect the electrical connector to the EVAP vent valve .
 
- Lower the vehicle.