Application  | Specification  | |
|---|---|---|
Metric  | English  | |
Auxiliary Battery Hold Down Retaining Bolt  | 18 N·m  | 13 lb ft  | 
Auxiliary Battery Tray Retaining Bolts  | 25 N·m  | 18 lb ft  | 
Auxiliary Positive and Negative Battery Cable Retaining Bolts to the Battery  | 15 N·m  | 11 lb ft  | 
Auxiliary Generator Brace Mounting (Long) Bolts  | 50 N·m  | 37 lb ft  | 
Auxiliary Generator Brace Mounting (Short) Bolts  | 25 N·m  | 18 lb ft  | 
Auxiliary Generator Bracket Mounting Bolts (A/C Compressor)  | 50 N·m  | 37 lb ft  | 
Auxiliary Generator Bracket Mounting Bolt (Backside of the Generator)  | 25 N·m  | 18 lb ft  | 
Battery Limiter to Fender Panel Bolt  | 25 N·m  | 18 lb ft  | 
Battery Negative Cable Lead to Engine Block Bolt  | 25 N·m  | 18 lb ft  | 
Battery Negative Cable Lead to Inner Fender Well Bolt  | 10 N·m  | 89 lb in  | 
Battery Negative/ Positive Terminal Bolts  | 17 N·m  | 13 lb ft  | 
Camshaft Position Sensor Screws  | 2 N·m  | 18 lb in  | 
Distributor Cap Retaining Screws  | 2.4 N·m  | 21 lb in  | 
Distributor Clamp Bolt  | 25 N·m  | 18 lb ft  | 
Distributor Rotor Retaining Screws  | 2 N·m  | 18 lb in  | 
Front Battery Hold Down Retaining Bolt  | 18 N·m  | 13 lb ft  | 
Front Battery Tray Retaining Bolts  | 25 N·m  | 18 lb ft  | 
Generator Brace to the Generator Bracket Retaining Bolts  | 50 N·m  | 37 lb ft  | 
Generator Bracket Mounting Bolts and Nuts (4.3L, 5.0L and 5.7L)  | 41 N·m  | 30 lb ft  | 
Generator Bracket Mounting Bolts and Nuts (7.4L)  | 66 N·m  | 49 lb ft  | 
Generator Bracket Mounting Bolts and Nuts (6.5L Diesel)  | 50 N·m  | 37 lb ft  | 
Generator Front Mounting Bolts  | 50 N·m  | 37 lb ft  | 
Generator Output (Bat) Terminal Nut  | 18 N·m  | 13 lb ft  | 
Generator Pulley Retaining Nut  | 100 N·m  | 74 lb ft  | 
Generator Rear Mounting Bolts  | 25 N·m  | 18 lb ft  | 
Ignition Coil Hold Down Studs  | 11 N·m  | 97 lb in  | 
Ignition Wire Harness to the Starter Motor Solenoid (Diesel Engines)  | 6 N·m  | 53 lb in  | 
Ignition Wire Harness to the Starter Motor Solenoid (Gas Engines)  | 2 N·m  | 18 lb in  | 
Oil Fill Tube Screws  | 5 N·m  | 44 lb in  | 
Oil Fill Tube Support Bracket Bolt  | 25 N·m  | 18 lb ft  | 
Positive Battery Cable Lead to Junction Block Retaining Nut  | 8 N·m  | 71 lb in  | 
Positive Battery Cable to the Starter Motor Solenoid (Diesel Engines)  | 16 N·m  | 12 lb ft  | 
Positive Battery Cable to the Starter Motor Solenoid (Gas Engines)  | 10 N·m  | 89 lb in  | 
Spark Plugs (New Cylinder Head)  | 30 N·m  | 22 lb ft  | 
Spark Plugs 4.3L, 5.0L and 5.7L (Used Cylinder Head)  | 15 N·m  | 11 lb ft  | 
Spark Plugs 7.4L (Used Cylinder Head)  | 20 N·m  | 15 lb ft  | 
Starter Motor Bracket Bolt to the Engine (Diesel Engines)  | 17 N·m  | 13 lb ft  | 
Starter Motor Retaining Bolts to the Engine  | 45 N·m  | 33 lb ft  | 
Starter Motor Heat Shield Retaining Bolts  | 3 N·m  | 27 lb in  | 
Starter Motor Heat Shield Retaining Nuts  | 6 N·m  | 53 lb in  | 
Starter Motor Retaining Nut to the Engine Bracket (Diesel Engines)  | 10 N·m  | 89 lb in  | 
Starter Motor Field Lead Retaining Nut  | 11 N·m  | 97 lb in  | 
Starter Motor Solenoid Clamp Retaining Screws  | 11 N·m  | 97 lb in  | 
Starter Motor Solenoid Retaining Bolts  | 9 N·m  | 80 lb in  | 
Starter Motor Brush Plate Retaining Screws 28 MT  | 3 N·m  | 27 lb in  | 
Starter Motor Drive Housing Retaining Bolts 28 MT  | 9 N·m  | 80 lb in  | 
Starter Motor Grounded Brush Retaining Screws 28 MT  | 2 N·m  | 18 lb in  | 
Starter Motor Insulated Brush Retaining Screws 28MT  | 2 N·m  | 18 lb in  | 
Starter Motor Shift Lever Retaining Nut 28 MT  | 5 N·m  | 44 lb in  |