- Remove the key from the ignition.
 
- Connect the IP module
yellow 2-way connector located under the instrument panel extension.
 
- Install the connector position assurance (CPA) to the IP module
yellow 2-way connector.
 
- Install the passenger knee bolster. Refer to 
Passenger Knee Bolster Replacement 
 in Instrument Panel, Gauges and
Console.
 
- Connect the steering wheel
module yellow 2-way connector located at the base of the steering column.
 
- Install the CPA to the steering wheel module yellow 2-way connector
located at the base of the steering column.
 
- Install the driver knee bolster. Refer to 
Driver Knee Bolster Replacement 
 in Instrument Panel, Gauges and
Console.
 
- Install the AIR BAG Fuse to the IP fuse block.
 
- Staying well away from both air bags, turn ON the ignition, with
the engine OFF.
 
| 9.1.  | The AIR BAG indicator will flash 7 times. | 
 
| 9.2.  | The AIR BAG indicator will then turn OFF. | 
 
- Perform the 
Diagnostic System Check - SIR 
 if the AIR BAG indicator does not operate as described.