- Position the transmission shift control lever into park.
 
- Apply the park brake.
 
- Raise and suitably support the vehicle. Refer to 
Lifting and Jacking the Vehicle
 .
 
- Remove the end of the range selector cable from the range selector lever ball stud.
 
- Position the transmission range selector lever to park. Rotate the range select lever clockwise until it reaches the full mechanical stop position.
 
- Slide the locking tab retainer to the side.
 
- Release the locking tab.
 
- Install the end of the range selector cable to the range selector lever ball stud.
 
- Engage the locking tab without disturbing the cable. This sets the adjustment.
 
- Slide the locking tab retainer over the locking tab.
 
- Lower the vehicle.
 
- Check the transmission for proper operation.
 
- Release the parking brake.