GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Express - AWD 🢒 Seats 🢒 Seat Hardware, Trim, and Upholstery 🢒 Rear Bench Seat Replacement

Removal Procedure

    Object Number: 783237 Size: SH
  1. Rotate the locking pin (3) at the rear of the seat riser out of the retainer.
  2. Pull the locking pin (3) out from the rear of the seat riser.

    3. Object Number: 333666 Size: SH
  3. Stow the locking pin in the hole provided at the rear of the seat riser (2).

    4. Object Number: 333671 Size: SH
  4. Lift the seat up and out of the floor rails.

    5. Object Number: 333672 Size: SH
  5. Remove the seat from the vehicle.

Installation Procedure

    Object Number: 333672 Size: SH
  1. Position the seat into the vehicle.

    2. Object Number: 333671 Size: SH
  2. Align the seat attaching points with the slots in the floor rail.
  3. Push the seat forward in the rail to lock the front of the seat risers onto the slots on the inside of the floor rail.

    4. Object Number: 333666 Size: SH
  4. Remove the locking pin (3) from the stored position at the rear of the seat riser  (2).

    5. Object Number: 783237 Size: SH
  5. Locate the hole in the floor rail at the rear of the seat riser  (2) and insert the locking pin.
  6. Rotate the locking pin (3) forward into the retaining clip.