Removal Procedure
- Turn OFF all the lamps and accessories.
 
- Turn the ignition OFF.
 
Warning: Refer to Battery Disconnect Warning in the Preface section.
- Remove the battery negative cable bolt in order to disconnect the negative battery cable from the battery.
 
- If applicable, remove the auxiliary battery negative cable bolt in order to disconnect the negative battery cable from the auxiliary battery.
 
Installation Procedure
Warning: Refer to Battery Disconnect Warning in the Preface section.
Caution: Refer to Fastener Caution in the Preface section.
Note: Clean any existing corrosion from the battery terminal bolt flange and the battery cable end.
- Install the negative cable terminal bolt and cable to the battery and Tighten to 
14 N·m (123 lb in)
 .
 
Important: Clean any existing corrosion from the battery terminal bolt flange and the battery cable end.
- If applicable, install the negative cable terminal bolt and cable to the auxiliary battery and tighten to 
14 N·m (123 lb in)
 .