Preliminary Procedures

1. Position the front side door window as needed for service.
2. Remove the front side door trim panel. Refer to Front Side Door Trim Panel Replacement.
3. Remove the front side door water deflector. Refer to Front Side Door Water Deflector Replacement.
4. Remove the nuts from the front side door window sash. Refer to Front Side Door Window Replacement.

1

Front Side Door Lock Screw (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Procedure

1. The front side door lock and lock rods stay with the regulator module.
2. Disconnect the electrical connector, located in the front side door conduit.

Tighten
10 N·m (890 lb in)

2

Front Side Door Window Regulator Module Rivet (Qty: 5)

Procedure

1. Remove the center of the rivets in the front side door window regulator module using a center punch.
2. Drill out the front side door window regulator module rivets, use equivalent rivets when install.

3

Front Side Door Window Regulator Module

Procedure

1. Slide the front side door window regulator lower roller out of the lower sash by sliding it forward with the module.
2. Lift upward and pull rearward to release the front side door window regulator module from the door.