GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2001 🢒 Impala 🢒 Engine 🢒 Engine Controls - 3.8L 🢒 Evaporative Emission Canister Purge Solenoid Valve Replacement

Removal Procedure
  1. Turn OFF the ignition.
  2. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement in Engine Mechanical.

    3. Object Number: 486596 Size: SH
  3. Disconnect the EVAP canister purge valve harness connector.
  4. Disconnect the EVAP canister purge valve purge pipe and vacuum supply hose.

    5. Object Number: 217748 Size: SH
  5. Release the retaining tab on the EVAP canister purge mounting bracket and remove the EVAP canister purge valve.
  6. Inspect for carbon release exiting the EVAP canister purge valve. Refer to Evaporative Emission System Cleaning .

Installation Procedure

    Object Number: 217748 Size: SH
  1. Install the EVAP canister purge valve onto the EVAP canister purge valve mounting bracket.

    2. Object Number: 486596 Size: SH
  2. Connect the EVAP canister purge valve purge pipe and vacuum supply hose.
  3. Connect the EVAP canister purge valve harness connector.
  4. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement in Engine Mechanical.