Removal Procedure
- Apply the parking brake.
 
- Block the vehicle wheels.
 
- Drain all of the air reservoirs. Refer to 
Air Brake Reservoir Draining
.
 
- Remove the governor air line.
 
- Remove the governor bolts (3) and the washers.
 
- Remove the governor (2).
 
- Remove the governor gasket (1).
 
Installation Procedure
- Install the governor gasket (1).
 
- Install the governor (2).
 
Notice: Refer to Fastener Notice in the Preface section.
- Install the governor washers and the bolts (3).
 
Tighten
Tighten the bolts to 21 N·m (15 lb ft).
- Install the governor air line.
 
- Start the engine.
 
- Check for leaks. Refer to 
Air Brake System Testing
 .
 
- Check for proper brake operation.
 
- Remove the wheel blocks.