Removal Procedure
- Relieve the fuel system pressure. Refer to 
Fuel Pressure Relief
 .
 
- Clean any dirt from the fuel pressure regulator retainer and the surrounding area.
 
- Remove the fuel pressure regulator retainer (1).
 
- Remove the fuel pressure regulator from the fuel pressure regulator housing.
 
Installation Procedure
- Install the backup ring on the fuel pressure regulator.
 
- Install a new large O-ring on the fuel pressure regulator.
 
- Install the regulator filter on the fuel pressure regulator.
 
- Install a new small O-ring on the fuel pressure regulator.
 
- Lubricate the fuel pressure regulator large O-ring and the small O-ring with clean engine oil.
 
- Push the fuel pressure regulator into the regulator housing on the fuel rail.
 
- Install a new fuel pressure regulator retainer (1).
 
- Connect the fuel pressure regulator vacuum line (1).
 
- Connect the negative battery cable.
 
- Tighten the fuel filler cap.
 
- Inspect for leaks.
 
| 11.1.  | Turn ON the ignition for 2 seconds. | 
 
| 11.2.  | Turn OFF the ignition for 10 seconds. | 
 
| 11.3.  | Turn ON the ignition. | 
 
| 11.4.  | Inspect for fuel leaks. |