- Block the wheels.
 
- Start the engine.
 
- Charge the system air pressure to the governor cut-out point.
 
- Release the brake pedal.
 
- Apply the system park control.
 
- Check that the parking brake chambers release promptly.
 
- Have an assistant pull out on the system park control and release
the brake pedal.
 
- Check that a prompt exhaust of air occurs at the exhaust port.
 
- Check that the parking brake chambers are applied by the position
of the slack adjusters.
 
- Apply the brake pedal hard.
 
- Check the position of the spring brake chamber assembly pushrod.
The pushrod should extend as you apply the brake pedal.
 
- Remove the wheel blocks.