Removal Procedure
- If required, raise the vehicle. Refer to 
Lifting and Jacking the Vehicle.
 
- Place a suitable container under the oil pan.
 
- Remove the oil drain plug.
 
- Drain the engine oil.
 
- Remove the oil filter.
 
- Inspect to ensure the engine oil filter gasket is removed.
 
Installation Procedure
- Lubricate the oil filter seal with clean engine oil.
 
Caution: Refer to Fastener Caution in the Preface section.
- Install the oil filter.
 
Tighten
Tighten the oil filter after contact plus 1 to 1¼ turn.
- Install the oil pan drain plug.
 
Tighten
Tighten the oil pan drain plug to 84 N·m (62 lb ft).
- If required, lower the vehicle.
 
- Fill the engine with the proper capacity and quality of engine oil. Refer to 
Fluid and Lubricant Recommendations and to 
Engine Mechanical Specifications.
 
- Operate the engine. Inspect for oil leaks and normal oil pressure.