Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Wiper/Washer Schematics Connector End View Reference: Wiper/Washer Connector End Views | |||
1 | Did you perform the Wiper/Washers Diagnostic System Check? | Go to Step 2 | |
2 |
Do the windshield wipers remain in the park position? | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 | Disconnect the windshield wiper/washer switch connector. Do the windshield wipers stop? | Go to Step 4 | Go to Step 5 |
4 | Replace the windshield wiper/washer switch. Is the repair complete? | Go to Step 6 | -- |
5 | Replace the windshield wiper motor module. Refer to Wiper Motor Cover Replacement . Is the repair complete? | Go to Step 6 | -- |
6 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
