GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Malibu 🢒 Body and Accessories 🢒 Doors 🢒 Power Accessory Switch Panel Replacement

Removal Procedure

    Object Number: 747940 Size: SH
  1. Using a small flat-bladed tool to release the power accessory switch panel retainers (1) from the door trim panel, push in and lift up. Start at the front of the panel.

    2. Object Number: 747942 Size: SH
  2. Disconnect the electrical connectors (1, 2) from the switches.
  3. Remove the power window switch from the accessory panel by releasing the retainer tabs.
  4. Remove the power mirror switch from the accessory panel by releasing the retainer tabs.

Installation Procedure

    Object Number: 747942 Size: SH
  1. Install the power mirror switch to the accessory panel by pressing it into the retainer tabs until fully seated.
  2. Install the power window switch to the accessory panel by pressing it into the retainer tabs until fully seated.
  3. Connect the electrical connectors (1, 2) to the switches.

    4. Object Number: 747940 Size: SH
  4. Install the power accessory panel to the door trim panel by pressing until the retainers (1) are fully seated.