Removal Procedure
- Close the sunroof.
 
- Lower the headliner as necessary. Refer to
Headlining Trim Panel Replacement 
 in Interior Trim.
 
- Disconnect the wire harness connectors from both ends of the sunroof control module (8).
 
- Remove the nylon tie straps from the control module (8).
 
- Remove the control module (8) from the sunroof assembly by  sliding the control module towards the right of the vehicle.
 
Installation Procedure
- Install the sunroof control module  to the sunroof assembly by sliding the control module (8) towards the  left side of the vehicle.
 
- Install the nylon tie straps to the control module (8).
 
- Connect the wire harness connectors to both ends of  the control module (8).
 
- Install the headliner, as necessary. Refer to 
Headlining Trim Panel Replacement 
 in Interior Trim.
 
- Check for proper operation of the sunroof.