GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1999 🢒 Monte Carlo 🢒 Engine 🢒 Engine Controls - 3.1L 🢒 Evaporative Emission Canister Purge Solenoid Valve Replacement

Removal Procedure

    Object Number: 73898 Size: SH
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection in engine electrical.
  2. Note the position of the hoses for installation.
  3. Remove the electrical connector and hoses from EVAP canister purge valve.
  4. Bend the tab on the EVAP canister purge valve mounting bracket to release the EVAP canister purge valve.
  5. Remove the EVAP canister purge valve.

Installation Procedure

    Object Number: 73898 Size: SH
  1. Bend tab on mounting bracket to retain the EVAP canister purge valve.
  2. Reinstall the EVAP Canister purge valve to purge valve mounting bracket.

    3. Once installed pull on the EVAP canister purge valve to ensure that the part will be held in place.

  3. Connect the electrical connector and hoses to solenoid.
  4. Reconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection in engine electrical.