This symptom table identifies undefined DTCs which are caused by an internal malfunction in the EBCM.
The following conditions may cause an intermittent malfunction:
| • | A poor connection | 
| • | Rubbed-through wire insulation | 
| • | A broken wire inside the insulation | 
Step  | Action  | Value(s)  | Yes  | No  | 
|---|---|---|---|---|
1  | Was the Diagnostic System Check performed?  | --  | ||
2  | 
 Does the undefined DTC or DTCs reset?  | --  | ||
3  | Replace the EBCM. Refer to Electronic Brake Control Module Replacement . Is the repair complete?  | --  | --  | |
4  | Is the malfunction intermittent or not present at this time?  | --  | Refer to Diagnostic Aids  | --  |