Step
| Action
| Value(s)
| Yes
| No
|
1
|
- Use a test light in order to backprobe between the door lock relay
terminal F and the ground.
- While observing the test light, press any door lock switch to
the UNLOCK position.
Does the test light illuminate?
| --
| Go to
Step
2
| Go to
Step 3
|
2
|
- Inspect for a poor connection at the door lock relay terminal F.
- If the connection is OK, replace the door lock relay.
Is the repair complete?
| --
| Go to
Step
4
| --
|
3
| Repair the poor connection or an open in CKT 194 between the
door lock relay and S312.
Is the repair complete?
| --
| Go to
Step
4
| --
|
4
|
- Ensure that the ignition switch is in the LOCK position.
- Reconnect any connectors and any components that you removed.
Have all repairs been made?
| --
| Go to
Power Door Locks System Check
| --
|
