Step
| Action
| Value(s)
| Yes
| No
|
1
|
- Disconnect the inoperative door lock actuator.
- Use a test light in order to probe between the inoperative door
lock actuator terminal B and the ground.
- While observing the test light, press the inoperative door lock
switch to the LOCK position.
Does the test light illuminate?
| --
|
Go to Step
2
|
Go to Step 3
|
2
|
- Use a test light in order to backprobe between the inoperative
door lock actuator terminal A and the ground.
- While observing the test light, press the inoperative door lock
switch to the UNLOCK position.
Does the test light illuminate?
| --
|
Go to Step
4
|
Go to Step 5
|
3
| Repair the poor connection or an open in circuit 295 between
the inoperative door lock actuator and S315.
Is the repair complete?
| --
|
Go to Step
6
| --
|
4
|
- Inspect for a poor connection at the inoperative door lock actuator.
- If the connection is OK, replace the inoperative door lock actuator.
Refer to
Front Side Door Lock Actuator Replacement
Is the repair complete?
| --
|
Go to Step
6
| --
|
5
| Repair the poor connection or an open in circuit 294 between
the inoperative door lock actuator and S314.
Is the repair complete?
| --
|
Go to Step
6
| --
|
6
|
- Ensure the ignition switch is in the LOCK position.
- Reconnect any connectors/components removed.
Have all repairs been made?
| --
| Go to
Power Door Locks System Check
| --
|
