Headlining Trim Panel Replacement Impala

Tools Required

J 38778 Door Trim Pad and Garnish Clip Remover

1. Remove the sunshades. Refer to Sunshade Replacement .
2. Remove the sunshade anchors. Refer to Sunshade Anchor Replacement .
3. Remove the dome lamp, if equipped. Refer to Dome Lamp Replacement .
4. Remove the overhead console, if equipped. Refer to Roof Console Replacement .
5. Remove the assist handles, if equipped. Refer to Assist Handle Replacement .
6. Remove the coat hook. Refer to Coat Hook Replacement .
7. Remove the side rail lamps, if equipped. Refer to Roof Side Rail Lamp Replacement .
8. Remove the windshield pillar garnish molding. Refer to Windshield Pillar Garnish Molding Replacement .
9. Remove the rear seat back. Refer to Rear Seat Back Replacement in Seats.
10. Remove the rear window trim panel. Refer to Rear Window Shelf Trim Panel Replacement in Interior Trim.
11. Remove the upper quarter trim panels. Refer to Rear Quarter Upper Trim Panel Replacement .
12. Remove the center pillar upper trim panels. Refer to Center Pillar Upper Trim Panel Replacement .
13. Remove the push-in retainers from the rear of the headliner using J 38778 . Use help from an assistant in order to support the front of the headliner.
14. Disconnect the headliner electrical connector and the ground wire.
15. Remove the headliner wiring harness from the inner roof panel.
16. Recline the front seats in order to aid in the removal of the headliner from the vehicle.
17. Remove the headliner (without sunroof) from the roof insulator pad, using a flat-bladed tool to cut through the glue bonding the headliner to the roof insulator pad.
18. Remove the headliner (with sunroof) from the sunroof module by disengaging the velcro strips.
19. Remove the headliner from the vehicle through the right front door, with an assistant.

Important: Do not bend the headlining too much when loading the headliner in to the vehicle.

1. Move the headliner into the vehicle through the right front door, with an assistant.
2. Position the headliner to the roof by aligning the sunshade holes in the headliner with the respective hole in the roof structure.
3. Connect the headliner electrical connector and the ground wire.
4. Install the headliner wiring harness to the inner roof panel.
5. Install the sunshades. Refer to Sunshade Replacement .
6. Install the sunshade anchors. Refer to Sunshade Anchor Replacement .
7. Install the two rear push-in retainers to the rear of the headliner.
8. Install the headliner (with sunroof) to the sunroof module by engaging the velcro strips.
9. Install the center pillar upper trim panels. Refer to Center Pillar Upper Trim Panel Replacement .
10. Install the rear quarter upper trim panels. Refer to Rear Quarter Upper Trim Panel Replacement .
11. Install the windshield pillar garnish molding. Refer to Windshield Pillar Garnish Molding Replacement .
12. Install the side rail lamps, if equipped. Refer to Roof Side Rail Lamp Replacement .
13. Install the assist handle, if equipped. Refer to Assist Handle Replacement .
14. Install the overhead console, if equipped. Refer to Roof Console Replacement .
15. Install the coat hook. Refer to Coat Hook Replacement .
16. Install the dome lamp, if equipped. Refer to Dome Lamp Replacement .
17. Install the rear window trim panel. Refer to Rear Window Shelf Trim Panel Replacement in Interior Trim.
18. Install the rear seat back.

•	For the non folding rear seat, refer to Seat Back Replacement - Rear (Non Folding Rear Seat) in Seats.

•	For the folding rear seat, refer to Seat Back Replacement - Rear (Folding Rear Seat) in Seats.

Headlining Trim Panel Replacement Monte Carlo

Tool Required

J 38778 Door Trim Pad and Garnish Clip Remover

1. Remove the sunshades. Refer to Sunshade Replacement .
2. Remove the sunshade anchors. Refer to Sunshade Anchor Replacement .
3. Remove the overhead console, if equipped. Refer to Roof Console Replacement .
4. Remove the dome lamp. Refer to Dome Lamp Replacement .
5. Remove the assist handle. Refer to Assist Handle Replacement .
6. Disconnect the electrical connector from the rear view mirror.
7. Remove the windshield pillar garnish molding. Refer to Windshield Pillar Garnish Molding Replacement .
8. Remove the rear seat back. Refer to Rear Seat Back Replacement in Seats.
9. Remove the rear window trim panel. Refer to Rear Window Shelf Trim Panel Replacement in Interior Trim.
10. Remove the upper quarter trim panel. Refer to Rear Quarter Upper Trim Panel Replacement in Interior Trim.
11. Remove the push-in retainers from the rear of the headliner using J 38778 , with help from an assistant to support the front of the headliner.
12. Disconnect the headliner electrical harness connector and the ground wire, which are located under the right side of the window trim panel.
13. Remove the headliner wiring harness from the inner roof panel.
14. Recline the front seats in order to aid in the removal of the headliner from the vehicle.
15. Remove the headliner (without sunroof) from the roof insulator pad, using a flat-bladed tool to cut through the glue bonding the headliner to the roof insulator pad.
16. Remove the headliner (with sunroof) from the sunroof module by disengaging the velcro strips.
17. Remove the headliner from the vehicle through the right front door, with an assistant.

Important: Do not bend the headlining too much when loading the headliner in to the vehicle.

1. Move the headliner into the vehicle through the right front door, with an assistant.
2. Position the headliner to the roof by aligning the sunshade holes in the headliner with the respective hole in the roof structure.
3. Connect the headliner electrical harness connector and the ground wire.
4. Install the headliner wiring harness to the inner roof panel.
5. Connect the electrical connector to the rear view mirror.
6. Install the sunshades. Refer to Sunshade Replacement .
7. Install the sunshade anchors. Refer to Sunshade Anchor Replacement .
8. Install the two rear push-in retainers to the rear of the headliner.
9. Install the headliner (with sunroof) to the sunroof module by engaging the velcro strips.
10. Install the rear quarter upper trim panels. Refer to Rear Quarter Upper Trim Panel Replacement .
11. Install the windshield pillar garnish molding. Refer to Windshield Pillar Garnish Molding Replacement .
12. Install the side rail lamps. Refer to Roof Side Rail Lamp Replacement .
13. Install the overhead console, if equipped. Refer to Roof Console Replacement .
14. Install the dome lamp. Refer to Dome Lamp Replacement .
15. Install the rear window trim panel. Refer to Rear Window Shelf Trim Panel Replacement in Interior Trim.
16. Install the rear seat back. Refer to Rear Seat Back Replacement in Seats.