Removal Procedure
- Remove the left side instrument panel insulator.
 
- Remove the left side carpet retainers. Refer to 
Front Carpet Retainer Replacement 
in Interior Trim.
 
- Remove the lower center pillar trim panel on the left side. Refer
to 
Center Pillar Lower Trim Panel Replacement 
 in Interior Trim.
 
- Fold back the carpeting in order to gain access to the parking
brake cable.
 
- Remove the parking brake cable from the cable guides.
 
- Raise and suitably support the vehicle. Refer to 
Lifting and Jacking the Vehicle 
in General Information.
 
- Remove the brake cable at the equalizer.
 
- Lower the vehicle.
 
- Remove the cable button end (1)
from the parking brake lever clevis.
 
- Remove the front cable (1)
from the vehicle.
 
Installation Procedure
- Install the front cable (1)
into the vehicle.
 
- Connect the cable to the parking brake lever.
 
- Install the cable button (1) 
in the lever clevis.
 
- Install the cable button clip to the lever clevis.
 
- Raise and suitably support the vehicle. Refer to 
Lifting and Jacking the Vehicle 
in General Information.
 
- Tighten the nut on the
equalizer in order to remove the slack in the cable.
 
- Lower the vehicle.
 
- Install the parking brake cable through the park brake cable guides.
 
- Position the carpeting properly.
 
- Install the lower center pillar trim panel on the left side. Refer
to 
Center Pillar Lower Trim Panel Replacement 
 in Interior Trim.
 
- Install the left side carpet retainers. Refer to 
Front Carpet Retainer Replacement 
in Interior Trim.
 
- Install the left side instrument panel insulator.
 
- Adjust the parking brake. Refer to 
Park Brake Adjustment 
.