Removal Procedure
- Remove the rear shelf trim panel. Refer to 
Rear Window Shelf Trim Panel Replacement 
 in Interior Trim.
 
- Adjust the acoustical barrier for access.
 
- Remove the antenna assembly tape from the rear shelf.
 
- Remove the global positioning system (GPS) antenna from the rear shelf using a small wide-bladed plastic tool in order to release the adhesive.
 
- Disconnect the GPS antenna cable connector.
 
- Clean the adhesive residue from the rear shelf using a razor blade and isopropyl alcohol pad and a clean lint-free cloth.
 
Installation Procedure
- Clean the surface of the rear shelf in the (GPS) antenna mounting location, using an isopropyl alcohol pad and a clean lint-free cloth.
 
- Connect the GPS antenna cable connector.
 
Important: Do not touch the adhesive backing.
- Remove the protective backing from the adhesive on the GPS antenna.
 
- Install the GPS antenna to the rear shelf surface.
 
Press the GPS antenna into place until fully seated for approximately 30 seconds.
- Secure the antenna assembly to the rear shelf with tape.
 
- Install the acoustical barrier.
 
- Install the rear shelf trim panel. Refer to 
Rear Window Shelf Trim Panel Replacement 
 in Interior Trim.