Removal Procedure
- Lower the right insulator panel. Refer 
to 
Instrument Panel Insulator Panel Replacement - Right Side 
.
 
- Remove the screws from the instrument panel (I/P) compartment.
 
- Open the I/P compartment.
 
- Depress the side stops located on the sides of the I/P compartment.
 
- Carefully remove the I/P compartment.
 
Installation Procedure
- Align the I/P compartment to the opening.
 
Depress the side stops located on the sides of the I/P compartment.
Install the I/P compartment to the I/P compartment opening.
Notice: Refer to Fastener Notice in the Preface section.
- Install the I/P compartment screws.
 
Tighten
Tighten the screws to 2 N·m (18 lb in).
- Close the I/P compartment. Verify that the I/P compartment is properly
 aligned. Adjust the compartment as required.
 
- Install the right insulator panel. Refer to 
Instrument Panel Insulator Panel Replacement - Right Side 
.