Mode Valve Actuator Replacement. Chevrolet Monte Carlo 2006

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2006 🢒 Monte Carlo 🢒 Vehicle Control Systems 🢒 Vehicle DTC Information 🢒 Mode Valve Actuator Replacement

Mode Valve Actuator Replacement Monte Carlo

Callout	Component Name
Preliminary Procedure Remove the instrument panel (I/P) compartment. Refer to Instrument Panel Compartment Replacement . Disconnect the mode actuator electrical connector.
1	Mode Actuator Screw (Qty: 2) Notice: Refer to Fastener Notice in the Preface section. Tighten 1.5 N·m (13 lb in)
2	Mode Actuator Tip Refer to Control Module References for programming and setup information.

Callout

Component Name

Remove the instrument panel (I/P) compartment. Refer to Instrument Panel Compartment Replacement .
Disconnect the mode actuator electrical connector.

Mode Actuator Screw (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
1.5 N·m (13 lb in)

Mode Actuator

Tip
Refer to Control Module References for programming and setup information.

Callout	Component Name
Preliminary Procedure Remove the instrument panel (I/P) inner panel. Refer to Instrument Panel Compartment Inner Panel Replacement . Disconnect the mode actuator electrical connector.
1	Mode Actuator Screw (Qty: 2) Notice: Refer to Fastener Notice in the Preface section. Tighten 1.5 N·m (13 lb in)
2	Mode Actuator Tip Refer to Control Module References for programming and setup information.