For 1990-2009 cars only
Horn Inoperative Due to Water Ingestion (Install Splash Shield on Replacement Horn)
| Subject: | Horn Inoperative Due To Water Ingestion (Install Splash Shield On Replacement Horn) |
| Models: | 2004-2006 Chevrolet Impala, Monte Carlo |
This bulletin is being revised to add the 2006 model year. Please discard Corporate Bulletin Number 06-08-54-001 (Section 08 -- Body and Accessories).
Condition
Some customers may comment on an inoperative horn.
Cause
This condition may be caused by water ingestion into the horn.
Correction
Do This | Don't Do This |
|---|---|
Install a new horn equipped with a splash shield. | Do not replace the horn without a splash shield. |
Technicians are to install a new horn equipped with a splash shield using the following procedure:
- Remove the inoperative horn. Refer to the Horn Replacement procedure in SI.
- Install a splash shield, P/N 89046906, on the new horn.
- Install the new horn so that it is turned approximately 90° from its original orientation. Position the opening of the new horn so that it faces toward the front of the vehicle. This will help prevent the water intrusion. Use the proper electrical connector that is supplied in the horn service kit.
- Test the operation of the new horn.
Parts Information
Part Number | Description | Qty |
|---|---|---|
89046906 | Shield, Horn Splash | 1 |
89046918 | Horn Kit, Generic (Low Note) | 1 |
89046919 | Horn Kit, Generic (High Note) | 1 |
Warranty Information
For vehicles repaired under warranty, use:
Labor Operation | Description | Labor Time |
|---|---|---|
N0200 | Horn Assembly - Replace | Use Published Labor Operation Time |
