Important: Do not overheat the terminal when resoldering.
| • | Reattach the rear defogger bus bar lead terminals by soldering.
Use a solder containing 3 percent silver and a rosin flux paste. |
| • | Before soldering the bus bar lead terminal, buff the repair area
using fine steel wool. |
| • | Apply the paste-type rosin flux in small quantities to the bus
bar lead terminal repair area using a brush. |
| | Notice: Use only enough heat to melt the solder. Using excessive heat can damage
the rear window defogger components or the rear window.
|
| • | Coat the soldering iron tip using solder prior to the repair procedure.
Use only enough solder in order to ensure a complete repair. |
