Starting System

• Brush Length - Standard

15.5 mm

0.610 in

• Brush Length - Minimum

10.0 mm

0.394 in

• Brush Spring Tension - Standard

1.8-2.4 kg

4.0-5.3 lbs

• Brush Spring Tension - Minimum

1.2 kg

2.6 lbs

• Commutator Insulation Depth - Standard

0.60 mm

0.024 in

• Commutator Insulation Depth - Minimum

0.20 mm

0.008 in

• Commutator Outside Diameter - Standard

30 mm

1.18 in

• Commutator Outside Diameter - Minimum

29 mm

1.14 in

• Commutator Runout - Standard

0.05 mm

0.002 in

• Direction of Rotation

Clockwise (as viewed from pinion)

• Number of Pinion Teeth

9

• Output

1.4 watts

• Rating

30 seconds

• Starter Current Draw, no load

90 amps at 11.5 volts

• Starter Current Draw, load, manual transaxle (9.1 N·m/80.5 lb in of torque)

300 amps at 7.7 volts

• Starter Current Draw, load, automatic transaxle (10.4 N·m/92 lb in of torque)

300 amps at 7.7 volts

• Locked Rotor - Manual Transaxle (18.6 N·m/13.8 lb ft)

780 amps at 4 volts

• Locked Rotor - Automatic Transaxle (25.5 N·m/18.8 lb ft)

980 amps at 4 volts

• Starter Solenoid Operating Voltage

8 volts minimum

• Solenoid Contact Plate Wear - Maximum

0.9 mm

0.035 in

• Voltage

12 volts