Tools Required

1. Use a chisel in order to loosen the staked part of the nut.
2. Install J 8614-01 . Remove the nut.



3. Use J 1859-A in order to remove the countergear.



4. Use the J 26941 with the J 23907 in order to remove the outer race from the case (1).
5. Remove the oil slinger and the spacer.
6. Remove the snap ring.
7. Remove the drive pinion end plug.
8. Insert the brass bar into the case hole and tap out the drive position.



9. Tap out the drive pinion.
10. Remove the bearing cage from the bore.