Was the Transfer Case System Check performed?

--

Go to Step 2

Go to Transfer Case Diagnostic System Check

1. Install a Scan Tool .
2. Turn ignition ON, engine OFF.
3. Using the scan tool, select the instrument cluster, command the SERVICE AWD/4WD lamp on.

Does the lamp go on?

--

Go to Step 3

Go to Step 4

Replace the transfer case shift control module. Refer to Transfer Case Shift Control Module Replacement

Is the repair complete?

--

Go to Step 5

--

Replace the instrument cluster.

Is the action complete?

--

Go to Step 5

--

1. Reconnect all previously disconnected components.
2. Turn the ignition ON, engine OFF.
3. Use the scan tool in order to clear all DTCs.

Is the action complete?

--

Go to Transfer Case Diagnostic System Check

--