General Cleaning of Fabric Trim with Foam Type Cleaner
| • | Use a multi-purpose powered cleaner or equivalent when cleaning
the following areas: |
| - | Panel sections where small cleaning rings may be left from spot
cleaning |
| • | Vacuum and brush the area in order to remove any loose dirt surrounding
the trim along the stitch or the welt lines. |
| • | Clean the complete trim panel one section at a time. |
| • | Mix the cleaner following the directions on the container label. |
| • | Use suds on a clean sponge. |
| • | Do not saturate or rub the material harshly. |
| • | Wipe off the remaining residue with a slightly damp absorbent
towel or cloth. |
| | A heat dryer or a heat lamp may be used. |
| | Use caution with a heat dryer or lamp in order to prevent fabric damage. |
