Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Exterior Lights System Check? | -- | Go to Step 2 | |
2 | Inspect the HAZ LP fuse in the underhood fuse block. Is the fuse open? | -- | Go to Step 10 | Go to Step 3 |
3 | Backprobe connector C211 terminal A4 to ground. Is voltage present? | Battery Voltage | Go to Step 5 | Go to Step 4 |
4 | Locate and repair the open in CKT 140 (ORN). Is the repair complete? | -- | -- | |
5 |
Is voltage present? | Battery Voltage | Go to Step 7 | Go to Step 6 |
6 | Replace the multifunction switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle in Steering Wheel and Column - Standard. Is the repair complete? | -- | -- | |
7 |
Is voltage present? | Battery Voltage | Go to Step 9 | Go to Step 8 |
8 | Locate and repair an open in CKT 1696 (GRY). Is the repair complete? | -- | -- | |
9 | Replace the turn signal lamp flasher. Is the repair complete? | -- | -- | |
10 |
Is the resistance less than the specified value? | 1 ohms | Go to Step 11 | Go to Step 9 |
11 |
Is continuity present? | -- | Go to Step 12 | Go to Step 13 |
12 | Locate and repair a short in CKT 140 (ORN). Is the repair complete? | -- | -- | |
13 | Test the continuity of connector C211 terminal E1 to ground. Is continuity present? | -- | Go to Step 14 | |
14 | Locate and repair a short in CKT 1696 (GRY). Is the repair complete? | -- | -- |
