Did you perform the Memory Seats System Check?

--

Go to Step 2

Go to Memory Seats System Check

1. Access the memory seat module.
2. Using a J 39200 digital multimeter (DMM), measure the voltage on CKT 1440 (ORN) cavity B of connector C3.

Is voltage present?

Battery Voltage

Go to Step 3

Go to Step 5

1. Operate the memory set 1 and memory set 2 positions of the power seat adjuster switch.
2. Using the J 39200 DMM, measure the voltage at the following cavities of the seat afjuster switch while operating all of the switch selections:

•

Cavity 10

•

Cavity 11

•

Cavity 12

Does the voltage move from HIGH to LOW?

--

Go to Step 4

Go to Step 8

Replace the memory seat module located under the seat cushion.

Is the repair complete?

--

Go to Memory Seats System Check

--

Inspect for an open in CKT 1440 (ORN) between the memory seat module and the PWR SEATS circuit breaker located in the body relay block.

Did you find an open?

--

Go to Step 6

Go to Step 7

Repair the open in CKT 1440 (ORN) between the memory seat module and the PWR SEATS circuit breaker located in the body relay block.

Is the repair complete?

--

Go to Memory Seats System Check

--

1. Test for a short to ground. Refer to Testing for Short to Ground in Wiring Systems.
2. Repair as necessary.

Is the repair complete?

--

Go to Memory Seats System Check

--

Replace the memory seat switch.

Is the repair complete?

--

Go to Memory Seats System Check

--

1. Ensure that the power seat adjuster switch is disconnected.
2. Disconnect the connector C1 from the memory seat module.
3. Disconnect the power seat adjuster switch.
4. Using the J 39200 DMM, measure the continuity on the following circuits between the memory seat module and the power seat adjuster switch:

•	CKT 614 (ORN)

•	CKT 615 (WHT)

•	CKT 616 (PPL)

Is continuity present on the circuits?

--

Go to Step 8

Go to Step 10

Locate and repair a short to ground on one or more of the following circuits:

Is the repair complete?

--

Go to Memory Seats System Check

--