Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
DEFINITION: The liftgate/endgate window release switch will not activate the liftgate/endgate window release actuator. The lock cylinder switch operates properly. | ||||
1 | Did you review the release system operation and perform the necessary inspections? | -- | Go to Step 2 | Go to Symptoms |
2 | Verify that the liftgate/endgate window release switch is inoperative. Does the liftgate/endgate window release switch operate normally? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 |
Did the liftglass release operate? | -- | Go to Step 7 | Go to Step 4 |
4 |
Did the liftglass release operate? | -- | Go to Step 5 | Go to Step 9 |
5 | Using a DMM test for continuity between liftglass relay terminal 1 and terminal 2. Refer to Circuit Testing in wiring systems. Is continuity present? | -- | Go to Step 6 | Go to Step 13 |
6 |
Did the liftglass release operate? | -- | Go to Step 15 | Go to Step 10 |
7 | Connect a 3A fused jumper wire between terminal D and terminal E of the endgate/liftgate window release switch. Did the liftglass release operate? | -- | Go to Step 14 | Go to Step 8 |
8 | Connect a DMM between ground and terminal E of the window release switch. Refer to Circuit Testing in wiring systems. Is continuity present? | -- | Go to Step 12 | Go to Step 11 |
9 | Locate and repair an open in CKT 56 (BLK/WHT). Refer to Wiring Repairs in wiring systems. Is the repair complete? | -- | Go to Step 16 | -- |
10 | Locate and repair an open in CKT 1344 (LT BLU). Refer to Wiring Repairs in wiring systems. Is the repair complete? | -- | Go to Step 16 | -- |
11 | Locate and repair an open in CKT 1050 (BLK). Refer to Wiring Repairs in wiring systems. Is the repair complete? | -- | Go to Step 16 | -- |
12 | Locate and repair an open in CKT 1576 (BLK). Refer to Wiring Repairs in wiring systems. Is the repair complete? | -- | Go to Step 16 | -- |
13 | Replace the liftglass relay. Is the repair complete? | -- | Go to Step 16 | -- |
14 | Replace the endgate/liftgate window release switch. Is the repair complete? | -- | Go to Step 16 | -- |
15 | Replace the BCM. Refer to Body Control Module Replacement in body control systems. Is the repair complete? | -- | Go to Step 16 | -- |
16 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 3 |
