Air Conditioning Clutch Coil Removal HT6/HD6/HU6

Tools Required

1. Remove the clutch plate and hub assembly. Refer to Compressor Clutch Plate and Hub Assembly Removal .
2. Use the J 6083 in order to remove the following components:

•	The pulley rotor (1)

•	The bearing assembly retaining ring (2)




3. Install the J 33023-A to the front head.
4. Install the J 41552 down into the inner circle of slots (1) in the rotor.



5. Turn the J 41552 clockwise in the slots in the rotor.
6. Perform the following steps in order to remove the pulley rotor and bearing assembly:

6.1.	Hold the J 41552 in position.

6.2.	Tighten the puller screw against the puller guide.

6.3.	Remove the pulley rotor and bearing assembly.




7. Mark the clutch coil terminal location (1) on the compressor front head. Refer to Clutch Rotor and/or Bearing Removal .
8. Install the J 33023-A on the front head of the compressor.
9. Install the J 8433-1 and the J 33025 .
10. Tighten the J 8433-3 against the puller pilot in order to remove the clutch coil (2).

Air Conditioning Clutch Coil Removal V7 - Direct Mount

Tools Required

1. Remove the A/C compressor from the vehicle.
2. Clamp the J 41790-A in a vise and attach the A/C compressor to the J 41790-A .



3. Remove the A/C compressor clutch plate and hub assembly. Refer to Compressor Clutch Plate and Hub Assembly Removal .
4. Install the J 33023-A onto the front head of the A/C compressor.
5. Remove the A/C compressor rotor and bearing assembly. Refer to Clutch Rotor and/or Bearing Removal .



6. Mark the clutch coil terminal location (2) on the A/C compressor front head.
7. Install the J 33025 onto the J 8433 .
8. Install the J 8433 onto the A/C compressor clutch coil (1) and tighten the puller leg bolts.
9. Tighten the center forcing screw J 8433-3 of the J 8433 against the J 33023-A to remove the A/C compressor clutch coil from the A/C compressor.
10. Remove the J 8433-3 , the J 33023-A , the J 33025 and the J 8433 .