Step | Action | Value(s) | Yes | No | ||||
|---|---|---|---|---|---|---|---|---|
DEFINITION:When the pedal assembly is pressed to the floor, the shift lever does not move freely in and out of reverse gear. | ||||||||
1 | Check for a pedal travel restriction. Is the vehicle equipped with aftermarket floor covering? | -- | ||||||
2 | Remove the aftermarket floor covering. Does the clutch work properly? | -- | System OK | |||||
3 | Check the clutch system. Refer to Preliminary Checks . Does the clutch work properly? | -- | System OK | |||||
4 | Check for air in the clutch hydraulic system. Is there air in the clutch hydraulic system? | -- | ||||||
5 | Bleed the clutch hydraulic system. Refer to Hydraulic Clutch Bleeding . Does the clutch work properly? | -- | System OK | |||||
6 | Check the master cylinder for worn seals. Are the seals worn? | -- | ||||||
7 | Replace the necessary components. Refer to Master Cylinder Replacement . Does the clutch work properly? | -- | System OK | |||||
8 | Check for a worn or damaged concentric slave cylinder. Is the concentric slave cylinder worn or damaged? | -- | ||||||
9 | Replace the concentric slave cylinder or release bearing. Refer to Clutch Concentric Actuator Cylinder Replacement . Does the clutch work properly? | -- | System OK | |||||
10 | Inspect the clutch assembly for the following:
Are the clutch components OK? | -- | -- | |||||
11 | Replace the clutch disc. Refer to Clutch Assembly Replacement . Does the clutch work properly? | -- | System OK | -- | ||||
