Caution: Do not attempt to repair or alter the head impact energy-absorbing material glued to the headliner or to the garnish trims. If the material is damaged, replace the headliner and/or the garnish trim. Failure to do so could result in personal injury.

1. Remove the I/P top trim panel. Refer to Instrument Panel Upper Trim Panel Replacement .
2. Remove the hinge pillar trim. Refer to Body Hinge Pillar Trim Panel Replacement .
3. Remove the windshield pillar garnish molding. Refer to Windshield Pillar Garnish Molding Replacement .



4. Disconnect the headliner wire connectors from the junction block located next to the clutch or brake pedal.
5. Remove the wire harness retainers along the windshield pillar and I/P assembly.
6. Remove the rear quarter trim panels, if necessary. Refer to Rear Quarter Trim Panel Replacement .
7. Remove the overhead console, if equipped. Refer to Roof Console Replacement .
8. Remove the DVD player, if equipped. Refer to Video Disc Player Replacement .
9. Remove both front sunshades. Refer to Sunshade Replacement .
10. Remove the rear coat hook, if equipped. Refer to Coat Hook Replacement .
11. Remove the interior dome lamp. Refer to Dome Lamp Replacement .
12. Remove the assist handles, if equipped. Refer to Front Assist Handle Replacement .



13. Disengaging the front of the headliner from the roof.
14. If replacing the crew cab headliner, remove the rear window from the vehicle. Refer to Rear Window Replacement .
15. Remove the headliner from the vehicle by grasping the headliner on the left and the right sides near the front of the cab.

1. With the aid of an assistant, install the headliner to the vehicle.
2. Install the rear window into the vehicle, if removed. Refer to Rear Window Replacement .
3. Install the assist handles, if equipped. Refer to Front Assist Handle Replacement .
4. Install the interior dome lamp. Refer to Dome Lamp Replacement .
5. Install the rear coat hook, if equipped. Refer to Coat Hook Replacement .
6. Install both front sunshades. Refer to Sunshade Replacement .
7. Install the DVD player, if equipped. Refer to Video Disc Player Replacement .
8. Install the overhead console, if equipped. Refer to Roof Console Replacement .
9. Install the rear quarter trim panels, if needed. Refer to Rear Quarter Trim Panel Replacement .




Important: Ensure that all of the wire harness retainers in the I/P and the windshield pillar are all pressed into place in order to prevent rattling during driving.

10. Connect the headliner electrical connector to the junction block located next to the clutch or brake pedal.
11. Connect the electrical connectors to the drivers side accessory housing.
12. Install the hinge pillar trim. Refer to Body Hinge Pillar Trim Panel Replacement .
13. Install the I/P top trim panel. Refer to Instrument Panel Upper Trim Panel Replacement .
14. Install the windshield pillar garnish molding. Refer to Windshield Pillar Garnish Molding Replacement .