Condition  | Action  | 
|---|---|
Engine idle speed too fast during NEUTRAL to range shift  | Adjust to correct idle speed.  | 
Faulty throttle sensor/circuit  | Repair or replace the sensor or circuit.  | 
Faulty or sticking bleed ball in 1-2-3-4 clutch piston housing  | Repair the transmission.  | 
Excessive clutch running clearance  | Rebuild the transmission and adjust clearances.  | 
Shift adaptives not converged  | Refer to FastLearn Procedure.  | 
Instrument panel tachometer incorrect  | Repair or replace the tachometer.  | 
Incorrectly calibrated electronic speedometer  | Calibrate the electronic speedometer.  | 
Faulty speed sensor/circuit  | Repair the circuit or replace the speed sensor. Refer to the speed sensor DTCs.  | 
Loose speed sensor  | Tighten the speed sensor retaining bracket bolt. Refer to Speed Sensor Replacement.  | 
Degraded fluid  | Change the transmission fluid and filter. Refer to Automatic Transmission Fluid and Filter Replacement.  | 
Incorrect fluid level  | Correct the fluid level. Refer to Transmission Fluid Check.  | 
Low main pressure  | Repair the transmission.  | 
Intermittent conditions  | Inspect the wiring harnesses and connectors.  | 
Loose or damaged speed gear  | Tighten the output flange bolt or replace the speed gear.  | 
Sticking valves in the control valve body  | Overhaul the control valve body assembly.  | 
Leaking pressure control solenoids  | Repair or replace the pressure control solenoids.  |