Step  | Action  | Yes  | No  | 
|---|---|---|---|
Schematic Reference: Wiper/Washer Schematics Connector End View Reference: Wiper/Washer Connector End Views DEFINITION: This table diagnoses the rear wipers are always on when the rear wiper/washer switch is in the OFF position.  | |||
1  | Did you perform the Diagnostic System Check - Vehicle?  | Go to Step 2  | |
2  | 
 Are the rear wipers always ON?  | Go to Step 3  | Go to Testing for Intermittent Conditions and Poor Connections  | 
3  | 
 Are the rear wipers always ON?  | Go to Step 5  | Go to Step 4  | 
4  | Replace the rear wiper/washer switch. Did you complete the replacement?  | Go to Step 6  | --  | 
5  | Repair the short to voltage condition. Refer to Wiring Repairs . Did you complete the repair?  | Go to Step 6  | --  | 
6  | Operate the system in order to verify the repair. Did you correct the condition?  | System OK  | --  |