Step
| Action
| Value(s)
| Yes
| No
|
1
|
- Place the ignition switch in the RUN or ACCY position.
- Connect a test lamp between terminal A and terminal B
of the left power window motor connector.
- Press the window switch up and down.
Does the test lamp light in both positions?
| --
| Go to
Step 2
| Go to
Step 3
|
2
|
- Inspect the left power window motor for a poor connection.
- If the connection is OK, replace the left power window motor.
Is the repair complete?
| --
| System OK
| --
|
3
|
- Connect a test lamp at the left power window switch connector C2
between terminal J and terminal L.
- Press the left power window switch up and down.
Does the test lamp light in both positions?
| --
| Go to
Step 4
| Go to
Step 7
|
4
|
- Connect a test lamp at the left power window switch connector
between terminal G and terminal K.
- Press the left power window switch up and down.
Does the test lamp light in both positions?
| --
| Go to
Step 5
| Go to
Step 6
|
5
| Repair the open in CKT 666 (DK BLU) or CKT 667 (BRN) between
the left power window switch and the left power window motor.
Is the repair complete?
| --
| System OK
| --
|
6
|
- Inspect the left power window switch connector for a poor connection.
- If the connection is OK, replace the left power window switch.
Is the repair complete?
| --
| System OK
| --
|
7
|
- Connect a test lamp at the right power window master switch connector
between terminal E and terminal A.
- Press the right power window master switch up and down.
Does the test lamp light in both positions?
| --
| Go to
Step 8
| Go to
Step 9
|
8
| Repair the loose connections or opens in CKT 166 or CKT 167
between the right power window master switch and the left power window switch.
Is the repair complete?
| --
| System OK
| --
|
9
| Replace the right power window master
switch.
Is the repair complete?
| --
| System OK
| --
|
